10.0.0.0.1 Admin IP

192.168.1.254 Admin Login

192.168.1.254 IP address is used by routers to identify itself on the network. When you get a new router and install it on the network it will connect to the network using 192.168.1.254 IP. It is possible to change it to a different IP during install but this is not necessary and only required in certain situations. If 192.168.1.254 is used then the router will assign addresses from 192.168.1.1 to 192.168.1.253 to devices on the network via DHCP protocol. Network mask 192.168.1.0/8 will be used.

Following routers use 192.168.1.254 IP address as default:

  • Alcatel routers
  • Linksys routers
  • Billion routers
  • Westell routers
  • Thomson routers

In order to access your router admin UI type 192.168.1.254 in your browser address bar and press enter. If you do not see router admin UI login then most probably your router uses IP address different from 192.168.1.254. Read our Access Default Gateway article to find out your router IP address.

Related articles:

Default IP Addresses:

Copyright 10-0-0-0-1.mobi ©2019